Description
The Nitecore MH25GT is a powerful USB rechargeable torch that features a Cree XP-L HI V3 LED to provide a maximum of 1000 lumens output on the highest setting.
The following main items are included in the P30 Hunting Kit & come supplied in a hard plastic case:
- MH25GT LED torch
- Micro USB charging cable
- Nitecore rechargeable 3400 mAh 18650 lithium-ion battery
- Red and green filters
- RSW1 remote pressure switch
- GM04 gun mount
- Tactical ring, holster, lanyard and pocket clip
A Nitecore 18650 3400 mAh lithium-ion battery is supplied with the torch and can be charged internally. Plug the supplied charging lead into the micro USB port one end, which is revealed by unscrewing the USB cover on the neck of the torch, and the other end into a USB port or suitable USB mains/car adaptor. The red LED indicator will blink twice every second to show charging is in progress.
Alternatively the MH25GT can be powered by two non-rechargeable CR123A primary lithium battery cells or two rechargeable RCR123A/16340 lithium-ion batteries, however they require external charging and can’t be charged inside the MH25GT.
By utilising the domeless design of the Cree XP-L HI V3 LED, the MH25GT produces a concentrated long range beam of up to 452 meters, which is normally only achievable with a searchlight with a much larger reflector.
Two modes of turbo and user defined are available to select from. Turbo is accessed when the head of the torch is fully tightened and momentary operation or constant on is possible. Slightly loosening the head will enter into user defined mode where you can select a preferred setting so that in everyday use you can loosen and tighten the head to go between turbo and your selected setting.
When the torch is off with the head loosened half presses will cycle through high, mid, low, SOS and strobe in turn. Fully pressing in the tail switch on the desired setting will select it and this will be remembered until you change it again.
The perfect torch for people who need a combination of a long beam range and the ability to quickly change between two different settings.
Product Features
Intelligent charging circuit with voltage detection charges safely and rapidly
Integrated micro USB charging port is water, dust and impact resistant
Multiple output modes are conveniently accessed via rapid rotary switch
User-defined mode provides customised brightness levels
Intelligent memory function stores preferred brightness setting
Stainless steel bezel ring protects core components from damage
Stainless steel titanium-plated clip
Anti-rolling design
Operational Modes
Using two Nitecore CR123A lithium metal primary single-use batteries:
Turbo: 1000 lumens; 45 minutes run-time*
High: 300 lumens; 3 hours, 15 minutes run-time
Mid: 110 lumens; 7 hours, 45 minutes run-time
Low: 50 lumens; 23 hours run-time
Using one Nitecore 18650 3400 mAh lithium-ion rechargeable battery:
Turbo: 1000 lumens; 1 hour run-time*
High: 300 lumens; 4 hours run-time
Mid: 110 lumens; 10 hours, 45 minutes run-time
Low: 50 lumens; 36 hours run-time
Tested to ANSI standards, the data is approximate and may vary between torches, batteries and environments.
Note: *The overheat protection will automatically drop the turbo brightness level after 3 minutes continuous use, therefore this is an accumulated run-time.
Important Battery and Battery Charger Information
Primary Cells – Please note that CR123A lithium metal primary battery cells are not rechargeable.
Rechargeable Cells – This torch is supplied with a lithium-ion rechargeable battery and a USB charging cable. Mains and car USB adaptors can be purchased separately.
Please click on the Product Accessories tab above to view compatible batteries and USB adaptors.
Technical Details
Type: Professional hand held LED torch
Operating Modes: Low / Mid / High / Turbo / Strobe / SOS
Lamp Type: Cree XP-L HI V3 LED
Focus: Fixed focus
Reflector System: Smooth aluminium reflector
Beam Range: 452 m
Batteries Required: 2 x CR123A lithium / 2 RCR123A / 1 x 18650 lithium-ion (included)
Run Time: Up to 36 hours on low
Overall Length: 160 mm
Head Diameter: 40 mm
Barrel Diameter: 25.4 mm
Weight: 143 grams (excluding batteries)
Body Colour: Black
Body Material: Aircraft grade aluminium
Body Finish: HA III military grade hard anodised
Lens: Toughened ultra-clear mineral glass with anti-reflective coating
Switch Type: End cap push button and rotary switch head
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Nitecore MH25GT LED torch x 1
Red filter x 1
Green filter x 1
RSW1 pressure switch x 1
GM04 gun mount x 1
Holster x 1
Lanyard x 1
Spare O-ring x 2
Tactical ring x 1
Spare rubber switch boot x 1
Pocket clip x 1
USB charging cable x 1
18650 lithium-ion 3400 mAh rechargeable battery x 1
Manual x 1
Reviews
There are no reviews yet.