Description
6.5 Grendel Brass for Sale:
6.5 Grendel Brass Overview:
The 6.5 Grendel brass is very consistent and will make reloading a simple and easy task.
No more hours of trimming and sizing, thanks to the steps Starline takes to ensure the rifle brass is correct when it leaves the factory.
This quality 6.5 grendel brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible.
The 6.5 Grendel Brass was designed specifically for the 6.5 Grendel which was designed for use in an AR-15 type rifle to offer ballistics similar to the .308 Winchester, with less recoil.
This flat shooting round utilizes the inherently accurate, high ballistic coefficient 6.5mm diameter bullet.
Its short case length allows it to use some of the longer, heavier match bullets, making this caliber one of the best choices for long range shooting out of an AR. With proper bullet selection, this caliber is no slouch in the field either, being suitable for deer-size game as well as varmint hunting.
Conversion of an AR to 6.5 Grendel requires a new bolt, barrel and magazines to feed the larger diameter cartridge. Several companies offer completed AR uppers and firearms, and reloading dies are readily available. Several manufacturers are now producing bolt action rifles in this caliber, many of which are built on “mini” actions, making for a lightweight rifle with plenty of range.
Hornady produces brass with the same precision, attention to detail and focus on perfection that has made them a world leader in bullets. They measure their brass for consistent wall concentricity, tests pressure calibration to ensure uniform case expansion and hand-inspects each piece.
This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures.
The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition.
6.5 Grendel Brass(how to make 6.5 grendel brass) Preparation:
With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.
These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.
Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.
Minor dents are normally removed in the first firing and will not affect case life or performance.
On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.
With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.
To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.
To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
If you are using Nickel plated brass, special care must be taken to lubricate the cases prior to sizing them. Nickel plating is harder than brass and the cases require more effort in sizing. In the event a case becomes stuck, purchase a stuck case remover; don’t use pliers, screwdrivers or other common household tools which could damage your sizing die.
Made In United States of America
Who makes alexander arms 6.5 grendel brass:
It’s Manufactured by Lapua exclusively for Alexander Arms.
The brass is Sold in bags of 100.
6.5 Grendel Brass Specifications:
Product Information:
- Tight tolerances for concentricity
- Controlled wall thickness
- Correct sizes lot to lot
- Small Rifle Primer
Reviews
There are no reviews yet.